What is a DPST 1NO 1NC latching relay module?

A DPST (Double Pole Single Throw) 1NO (One Normally Open) 1NC (One Normally Closed) latching relay module is an electrical component used to control high-power devices using a low-power signal. This type of relay can switch circuits on and off without needing continuous power, making it energy-efficient. It is commonly used in applications like automation systems, DIY electronics projects, and remote control devices, allowing users to operate lights, motors, and other equipment reliably.

How does a latching relay work?

A latching relay maintains its position after the triggering signal is removed. This means that when activated, it will stay switched on until it receives a second signal to turn off. This characteristic is beneficial for low-power control applications, as it reduces energy consumption since it doesn't require a constant input to maintain the circuit. Practical uses include smart home systems, where you can control devices remotely without having to keep pressing buttons or switches.

What are the main features of the DPST 1NO 1NC latching relay module?

The main features of the DPST 1NO 1NC latching relay module include its ability to handle loads up to 8Amps at 5V DC, two independent circuits for flexibility, and the simple integration into microcontroller projects such as Arduino or Raspberry Pi. This versatility makes it ideal for various automation tasks, such as turning on multiple devices with a single command or implementing safety features during device operation.

What applications are ideal for using a DPST latching relay?

DPST latching relays are suitable for various applications, including home automation projects, industrial controls, and smart home devices. They can be used to operate various loads such as lights, heaters, or motors, allowing users to create on/off control systems without constant power consumption. For instance, in home automation, you can set up remote control options for lights or appliances, ensuring energy-efficient management.

How can I connect a DPST 1NO 1NC relay module to my microcontroller?

To connect the DPST 1NO 1NC relay module to a microcontroller, follow these steps: connect the trigger pins to a digital output pin on the microcontroller, then connect the common terminals to your load. Make sure to provide appropriate power to the module, typically at 5V DC. This setup allows the microcontroller to control high-voltage devices while safeguarding its components against high currents. This configuration is widely used in DIY electronic projects and robotics.

Are DPST latching relays easy to integrate with Arduino?

Yes, integrating a DPST latching relay with Arduino is straightforward. By using a few jumper wires, a simple code snippet, and the relay's trigger pins, users can easily manage multiple outputs from their Arduino. This is particularly useful for creating complex automation systems, such as lighting controls or motorized appliances, allowing for efficient control without constant power needs. With libraries available specifically for Arduino, setup and coding become even easier.

What safety precautions should I take while using latching relays?

When using latching relays, ensure that the load does not exceed the relay's power rating and always use appropriate fuses for protection. It's important to isolate the high and low voltage sections of your circuit to prevent damage and hazards. Additionally, proper grounding and following installation guidelines will enhance safety and reliability, which is critical in applications such as home automation or industrial systems.

Can I control multiple devices with one DPST latching relay?

Yes, a DPST latching relay can control multiple devices concurrently because it has two independent switches. By wiring different devices to the relays' outputs, you can operate them simultaneously. This flexibility is beneficial for building automation solutions where multiple appliances need to be controlled through a singular interface, improving the overall efficiency of your system.

Do I need additional components to use the relay with my project?

Typically, you might need additional components depending on your project requirements, such as resistors, diodes for flyback protection, and potentially a transistor to drive the relay if your microcontroller's output can't handle the relay coil's current. Additionally, using a power supply that meets the relay's voltage requirements ensures proper operation. These components will help ensure a smooth functioning of your project's relay system.

Where can I buy DPST 1NO 1NC 8Amp Latching Relay Module DC 5V?

You can buy the DPST 1NO 1NC 8Amp Latching Relay Module DC 5V from Ubuy. Ubuy offers a wide range of electronic components, including various relay modules, making it a reliable choice for sourcing the right components for your projects.

Bagaimana untuk Membeli-belah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) Dalam Talian Dari Ubuy?

Sangat mudah untuk membeli-belah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) dalam talian daripada Ubuy.. Anda hanya perlu mencari produk, pilih kaedah penghantaran anda semasa mendaftar keluar dan hantar ke lokasi anda.

Adakah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) Tersedia untuk Beli-belah Dalam Talian dalam Malaysia?

Ya, di Ubuy Malaysia produk ini tersedia untuk anda membeli-belah pada harga yang berpatutan.. DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) tidak tersedia secara tempatan tetapi anda boleh mempercayai kami dengan perkhidmatan penghantaran ekspres kami.

Berapa lama masa yang diperlukan untuk mendapatkan produk selepas membuat pesanan?

Masa penghantaran produk pesanan anda berbeza mengikut apa yang anda pesan dan kaedah penghantaran yang anda pilih.. Anggaran masa penghantaran dinyatakan semasa proses daftar keluar, jadi berhati-hati semasa membeli-belah.

OONO Lihat Asal

DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V)

This latching relay has power-off memory and supports three input control modes.

OONO

Item #: 32885774

DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V)

Item #: 32885774

MYR 153

Price Details

Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )

^{*All items will import from AS}

Ketersediaan : Dalam stok

Diimport dari kedai USA

QTY:

Pesan sekarang dan dapatkannya lebih kurang pada Sunday, Ogos 23

Secured transaction

Our Top Logistics Partners

This latching relay has power-off memory and supports three input control modes.

Waranti U-Care:

Tiada

Pilih pelan

Fast
Shipping

Free
Return^*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

Note: Step Down Voltage Transformer required for using electronics products of AS store (110-120). Recommended power converters Beli Sekarang.

What Stands Out

Latching Functionality

This relay module retains its state even after power loss, reducing energy consumption and enhancing reliability in applications that require maintaining status over time.

Dual Contact Design

With both Normally Open (NO) and Normally Closed (NC) contacts, this module provides versatile control options, making it suitable for a wide range of circuit applications.

High Current Rating

Rated for 8Amps, the relay module can handle substantial loads, ensuring performance efficiency and reliability for various high-power applications without the risk of overheating.

Maklumat produk

Connector Type	Screw
Contact Type	1no 1nc
Current Rating	8 A
Jenis Pemasangan	Screw Mount
Mod Operasi	Off
Watt	40 watts
Coil Voltage	5 volts
Contact Current Rating	8 A
Maximum Switching Current	8 A
Minimum Switching Voltage	5 volts_of_direct_current
Nama Jenama	OONO
Kiraan Unit	1 Kira
Pengeluar	CZH-LABS
Model	F-1030 Series
Nombor Bahagian	F-1030 Series
Contact Material	Silver Alloy
Berat item	0.3 lbs (140 gram)

Who Should Buy?

DIY Electronics Hobbyists
Ideal for hobbyists looking to control devices with low voltages using a reliable switching mechanism.
Automation Projects
Suitable for various automation projects that require effective switching in smart home or industrial setups.
Arduino Users
Perfect for Arduino users needing a latching relay to manage high-power loads in their projects.

High Voltage Applications
Not suitable for applications requiring higher voltage ratings beyond the module's 5V specification.

PENERANGAN PRODUK

DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V)

Ada sebarang Pertanyaan? Berbual dengan kami

Soalan & Jawapan Pelanggan

soalan: Bagaimana untuk Membeli-belah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) Dalam Talian Dari Ubuy?

jawab: Sangat mudah untuk membeli-belah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) dalam talian daripada Ubuy.. Anda hanya perlu mencari produk, pilih kaedah penghantaran anda semasa mendaftar keluar dan hantar ke lokasi anda.
soalan: Adakah DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) Tersedia untuk Beli-belah Dalam Talian dalam Malaysia?

jawab: Ya, di Ubuy Malaysia produk ini tersedia untuk anda membeli-belah pada harga yang berpatutan.. DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V) tidak tersedia secara tempatan tetapi anda boleh mempercayai kami dengan perkhidmatan penghantaran ekspres kami.
soalan: Berapa lama masa yang diperlukan untuk mendapatkan produk selepas membuat pesanan?

jawab: Masa penghantaran produk pesanan anda berbeza mengikut apa yang anda pesan dan kaedah penghantaran yang anda pilih.. Anggaran masa penghantaran dinyatakan semasa proses daftar keluar, jadi berhati-hati semasa membeli-belah.

OONO Electromechanical Relays Editorial Review

The latching relay module is designed for DC power sources and can be switched from the negative (ground) side to latch or unlatch the module. It remembers the previous state on power loss but can be modified to reset on start-up. Multiple momentary set and reset switch pairs wired in parallel can control the module. It comes with a protection diode across the relay coil. Customer reviews have been mixed. Some are disappointed as the product arrived broken/faulty or didn't work, and no directions were included. Others have had success with the product, and it does what it's supposed to do. One review mentioned that they had to add a resistor transistor circuit to reverse the incoming trigger as it needs a negative trigger, and they needed to use +5V. Another review stated that no quiescent current draws, and it works great. Overall, the module is compact, and the pigtail wires are better than the cheap knock-off connectors.

Customer Reviews & Ratings

5.0

1 rating pelanggan

5 bintang

100%
4 bintang

0%
3 bintang

0%
2 bintang

0%
1 bintang

0%

Ulas Produk Ini

Kongsikan pandangan anda dengan pelanggan lain

Kebaikan

Can be controlled by multiple momentary set and reset switch pairs wired in parallel.
Comes with a protection diode across the relay coil.
Draws no current after initial set-reset pulse.
Small and compact.

Keburukan

Mixed reviews.

Product Price History

Maklumat penting

Pengehadan: Untuk produk penghantaran antarabangsa, harap maklum bahawa sebarang jaminan pengeluar mungkin tidak sah; pilihan perkhidmatan pengeluar mungkin tidak tersedia; manual produk, arahan, dan amaran keselamatan mungkin tidak dalam bahasa negara destinasi; produk-produk (dan bahan-bahan berkaitannya) mungkin tidak direka selaras dengan standard negara destinasi, spesifikasi, dan syarat pelabelan; dan produk-produk itu mungkin tidak mematuhi kepada voltan negara destinasi dan lain-lain standard elektrik (memerlukan penggunaan adaptor atau penukar aliran jika perlu). Penerima adalah bertanggungjawab untuk memastikan bahawa produk itu boleh diimport selaras dengan undang-undang negara destinasi. Apabila memesan dari Ubuy atau pihak afiliasinya, si penerima adalah merupakan pengimport dalam rekod dan mesti mematuhi kepada semua undang-undang dan peraturan negara destinasi.
Bukan semua produk yang tersenarai di Ubuy adalah untuk dijual, kerana Ubuy adalah enjin carian global. Produk-produk adalah tertakluk kepada peraturan eksport/perdagangan.

MYR 153

Pesan sekarang dan dapatkannya lebih kurang pada Sunday, Ogos 23

QTY:

Secured transaction

PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.

Our Top Logistics Partners

Fastest cross-border delivery

Ciri & Faedah

Power-off memory for maintaining output switch status
Supports both Normally Open and Normally Close modes
Compact plastic case, with screws for easy mount
Supports three input control modes
Operating voltage versions available for DC 5V, 12V and 24V
Rated current 8A/250VAC or 8A/30VDC for one switch.

Ubuy Assurance

Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns ^*, and secure packaging on every order.

DPST 1NO 1NC 8Amp Latching Relay Module (DC 5V)

MYR 153

Fast Shipping

Free Return*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

What Stands Out

Maklumat produk

Who Should Buy?

PENERANGAN PRODUK

Soalan & Jawapan Pelanggan

OONO Electromechanical Relays Editorial Review

Customer Reviews & Ratings

Ulas Produk Ini

Kebaikan

Keburukan

Product Price History

Maklumat penting

MYR 153

Ciri & Faedah

Ubuy Assurance

Fast
Shipping

Free
Return^*